Krash Jet Ski Cables & Accessories
Most items are in stock however this is not live inventory
Krash Main Page

Motion Pro Cable Luber V3
Makes it easy for you to efficiently lube control cables without the mess
Unique design features an innovative seal and adjustable plunger to ensure proper lubrication with less lube
Works on most control cables with 4 mm to 8 mm O.D. housing
Will seal over most free spinning end fittings
Can be used with compressed air to blow out dust and debris prior to lubing
Easy to use and clean
For best results we recommend using Motion Pro Cable Lube Part No. 15-0002 (sold separately)
Patented design

Motion Pro Cable Lube
Special blend of Red Line synthetic lubricants and rust inhibitors keeps your cables working smoothly in any weather condition from hot to cold, wet or dry
Ideal for use with Motion Pro cable luber
Depending on riding conditions, it's recommended to lube your cables between rides or after every other ride

PROTECT ALL Cable Life Lubricant
Cable Life Minus 70 lubricant is specially formulated to stay fluid to -70F
Ideal for lubricating cables on motorcycles, PWCs, snowmobiles and other vehicles
Lubricates and rustproofs all moving parts
Depending on riding conditions, it's recommended to lube your cables between rides or after every other ride

Krash Trim Assist Bracket
Reduces the amount of pull required to use the trim. Comes with a mounting bolt. Fits all stand up models so far.  May not fit Reapers. Were checking on this. There appears to be a top of the bracket clearance issue. We will see about cutting it down and having one specifically for the reaper. Will not work on 2021 with the pully system.

WSM Throttle Cables
High quality with the same OEM design however the lower portion is 6.8mm wide vs the stock 6mm from Krash requiring a slight reaming out of the mounting hole on the carb bracket.

Krash Trim Cable
Krash OEM trim cable. These changed from a 1.5mm to a 2mm cable at some point. Works on small stand ups and reaper.
Not compatable with RRP trim levers.

Krash to RRP Trim Cable Conversion Kit
This cable is twice as thick as the OEM Krash cable Works on Krash skis with the old style trim system. Can also work in place of the roller trim system but it will be a step back and increase the amount of strength to pull.  Sold as pictured with your choice of lever color.  Works on small stand ups and reaper. We recommend lubing this cable before use and the lube kits are available at the top of this page.  Video Here
Not compatable with other trim levers.

The flat bracket may need heated up and twisted/bent so that the cable is pulling out straight depending upon whether you are using the factory setup or trim assist bracket.
Request installation video after purchase

Krash to RRP Trim Cable Conversion Parts
Please read all the notes above for a full understanding of parts and procedures.

RRP Trim Levers and Cables are available here

Krash 2021 Pulley Trim System
All the parts you need to upgrade your old system to the new easy pull pulley trim system. You will need your own drill, drill bit and tap for the trim nozzle. We recommend the drilling and tapping to be done by a professional.

Krash Steering Cable
Krash OEM cable. 
Works on stand ups and reaper. Also you can chose one for the Predator RR

Aftermarket Krash Steering Cable
Krash aftermarket cable.  Same quality as stock if not better. Works on standard stand ups and reaper. Not for Predator RR

Steering Cable/Trim Cable End
spring loaded, normally silver in color

Steering Cable/Trim Cable ball joint stud
normally silver in color

RRP Steering Cable Strengthening Lock Nut
Helps strengthen the end of the steering cable.
2 are recommended