Non Pivot Style Handlebar Riser Blocks
Improve the handling, control and comfort of your snowmobile by adding a
handlebar riser block
Made out of aluminum
Kits come complete with hardware and installs in minutes
Most snowmobiles will accept a 2" Riser Block without having to modify any
cables or wiring
We recommend unbolting your stock neck, raising the bars and measuring to
see how high you can go before ordering
We have extension kits to lengthen your stock throttle cable and brake line
if necessary (pictures below)
Make
size 1" $13.95
Make
size 2" $21.95
Make
size 3" $29.95
Make
size 4" $34.95
Make
size 5" $39.95
5" models are special order and may take extra time
Powermadd Pivot Style Handlebar Riser Blocks available in 2, 4, 6 or 8 inch
Make
size 2" $29.95
Make
size 4" $34.95
Make
size 6" $39.95
Make
size 8" $44.95
Throttle Cable extension kit $29.95
Powermadd Pivot Adaptor Kit Allows the handlebar and
rider to move forward, optimizing the center of gravity of your snowmobile
for better handling and control (like the Ski-Doo MXZ-REV chassis concept.)
Handlebars can be pivoted forward or back from original stock position.
Pivot Adapter raises bars an additional 1.25" Machined from 6061-T6
aluminum for maximum strength. Most snowmobiles accept the Pivot
Adaptor and a 2" Riser Block without modification to cables or wiring.
Pivot Adapter Kits will fit all snowmobiles which do not come stock with an
OEM Pivot Riser
Ski-doo 2002 and newer X models require different parts.
Call so we can explain and get you set up.
1-866-Full Throttle (385-5847)
Rox
Based on the Rox Speed FX patented pivoting riser, these risers work on any
machine with 7/8” bar clamps – snowmobiles, ATV, Motorcycles, etc.
Dual rotation points allow rider to select optimum riding position
Check your cables first to see how high you can raise your bars.
Three heights available 2”, 3.5” and 5”.
