Click here to return to our home page
Parts · Accessories · Gear · Apparel & Wetsuits
for
Motorcycles 
· Jet Skis · ATVs · Snowmobiles
Home
Catalog Website
Products:
STREET
OFF ROAD
SNOWMOBILE
IQR Parts & Info
WATERCRAFT
Wetsuits
Communication
Helmet Accessories
Custom Stickers
Extras:
About us
Contact us
Map to JS
Ordering
Service
Social Media
Trips & Events
Photos & Video
Site Map
Employment
Policies
 

Snowmobile Handlebar Riser Blocks
We also sell risers from - FLY  RSI  SPORTECH  &  SPI










Non Pivot Style Handlebar Riser Blocks
Improve the handling, control and comfort of your snowmobile by adding a handlebar riser block
Made out of aluminum
Kits come complete with hardware and installs in minutes
Most snowmobiles will accept a 2" Riser Block without having to modify any cables or wiring
We recommend unbolting your stock neck, raising the bars and measuring to see how high you can go before ordering
We have extension kits to lengthen your stock throttle cable and brake line if necessary (pictures below) Arctic Cats up to '99 with 1/4" bolts. Arctic Cats '00 and up use 5/16" bolts. Some Ski-doo X models require different parts like the Rox risers below.  Call for further explanation and we'll get you set up. 1-866-Full Throttle (385-5847)

Make

size 1"  $32.95 special order

Make size 2"  $34.95
Make size 3"  $39.95
Make size 4"  $44.95
Make size 5"  $64.95
5" models are special order and may take extra time




 


PowerMadd Universal Pivot
Riser System
Universal Pivot Adaptor works on all brands of snowmobiles with flat steering post!
Raises bars 3”
Dual pivot points allow for maximum handlebar positioning
Use Extension Blocks as an easy way to increase bar height an additional 1", 2", or 3”
(If you want to go higher than 3" check out the Pivot Adaptor and Pivot Riser Blocks)
Works great on mountain style bars because it is only 3.25" wide
 

Universal 3" Pivot Adaptor/Riser  $69.95

Universal Riser Block 1"  $19.95
Universal Riser Block 2"  $24.95
Universal Riser Block 3"  $29.95



PowerMadd Pivot Adaptor Kit
(top picture to the left)
Allows the handlebar and rider to move forward, optimizing the center of gravity of your snowmobile for better handling and control (like the Ski-Doo MXZ-REV chassis concept.)  Handlebars can be pivoted forward or back from original stock position.  Pivot Adapter raises bars an additional 1.25"  Machined from 6061-T6 aluminum for maximum strength.  Most snowmobiles accept the Pivot Adaptor and a 2" Riser Block (sold separately) without modification to cables or wiring.  Pivot Adapter Kits will fit all snowmobiles which do not come stock with an OEM Pivot Riser. Bottom picture to the left shows the adaptor installed and the process.
Make  $54.95

Some Ski-doo X models require different parts like the FLY or RSI risers.  Call for further explanation and we'll get you set up. 1-866-Full Throttle (385-5847)




PowerMadd Pivot Style
Handlebar Riser Blocks
available in 2, 4, 6, 8 or 10 inch and are 4.24" wide so make sure your handlebars will accommodate them.
NOTE: Yamaha must use pivot adaptor. Polaris IQ production models with the 3" pivot post will need to use the narrow style below or the  FLY or RSI risers here.

Make

size 2"  $34.95

Make size 4"  $39.95
Make size 6"  $44.95
Make size 8"  $49.95
Make size 10" $54.95



3.25" wide


Polaris Narrow Style Riser
These risers are designed to be taller replacements for the narrower stock riser that comes on the Polaris IQ and RMK models.

Measure your stock riser, if it is 3.25" wide this is your replacement riser.
size 4.5"  $44.95
size 6.5"  $49.95
size 8.5"  $54.95




Yamaha Nytro Style Riser
This riser is designed to be a taller replacement for the Nytro stock 2.5" riser. 4" is as tall as you can go without changing the brake line and throttle cable.
size 4"  $44.95


PowerMadd oversized bar clamp

(pictured on a bar riser) Universal adaptor allows 1 1/8" bars to be clamped to ATV's, motorcycles and snowmobiles with PowerMadd Pivot Riser Blocks.
PowerMadd oversized bar clamp kit   $39.95


Powermadd Riser Cover Bag $44.99
Fits most sleds. Installs in seconds. 
The PowerMadd Riser Bag helps clean up your bars after putting on a larger riser block by covering up wires and gives you the added benefit of a pocket for storage and the pad for protection.
Use on Snowmobiles or ATV’s with at least a 3” riser.
Includes a 1” nylon strap and buckle to secure the bag to your bars and two 3” velco straps on the sides of the bag for stability and to hide wires.
Made of heavy duty nylon material.
The pocket comes with a waterproof zipper and a water resistant wire inlet on the bottom.
The side of the bag features a D-ring to attach your tether when not being used.

Color

PowerMadd handlebar pad $14.95

PowerMadd Throttle Cable extension kit  $29.95
note: will not fit '07-'08 Arctic Cat F series

Option


Powermadd Extended Length Brake Lines

Part #    Brand Models    Length
Part # Price Description (Length)
Arctic Cat
PM15600$50.00All 1994-2000 (38.75")
PM15602$50.00M Series, Firecat up to 2006 (43.5")
PM15612$50.00M Series '07-11 (43.5")
Polaris
PM15604$50.00All except Pro-X (36.75")
Note - 2000 - 2003 RMK, and 2000-01 Gen II have a hard 90 degree
bend at caliper end - use PM15616.
PM15605$50.00Pro-X, '06 900 RMK, '06-08 IQ Chassis (41")
PM15611$50.00Dragon and Assult '09-10 (35.5")
PM15616$50.00Gen II 200-01, RMK 2000-03 (37")
Note - has 90 degree bend at caliper.
Ski Doo
PM15606$50.00F2000, CK3, S2000 (39")
PM15607$50.00ZX Model (35.25")
PM15608$50.00Rev Model (Not Rev XP) (42")
PM15615$50.00Rev XP (42")
Yamaha
PM15609$50.00SX, Max, Viper '97-'03 (37")
PM15610$50.00'03 - RX; '04 - RX, RX Warrior; '05 - Rage, Vector; '06 - Vector (43.5")
PM15611$50.00'04 - SX, Venture; 05 - RX, Warrior, SX; 06 - Apex, Attak, Nytro pre-2008 (35.5")
PM15613$50.00Nytro 2008-09 RTX trail (51")
PM15614$50.00Nytro 2008-09 MTX mountian (57")
 
Braided, stainless brake lines.  They're coated with a durable PVC clear coat and at least 6" longer than stock.
Powermadd Extended Length Brake Lines $50
(We may substitute the Fly or RSI brake lines if the Powermadd ones are out of stock.)
Make 


Before


After

Click here to purchase a Snowmobile Neck Cover or Snowmobile Neck Gaiter to cover up
your wires and cables and fill in the void
.

Click here to see a step by step installation of two different styles of bar riser systems

More risers can be seen here: FLY  RSI  SPORTECH  &  SPI